• <progress id="0ooas"></progress><tbody id="0ooas"></tbody>
    <em id="0ooas"></em>

          <th id="0ooas"><pre id="0ooas"></pre></th>

          <th id="0ooas"><pre id="0ooas"></pre></th>
          1.  

            SZ05-L-STD-3 zigbee module

            0.00
            0.00
              
            Product Description


              SZ05-L-STD-3 Zigbee module

            SZ05-L-STD-3 Zigbee module

            First, product introduction

             

            The SZ05-L-STD-3 wireless data transmission module adopts TI's chip and conforms to the Zigbee pro international standard RF transceiver and microprocessor. It has long communication distance, ultra-low power consumption, strong anti-interference ability and flexible networking. Advantages and features; practical MESH networking. The SZ05-L-STD-3 data transmission module implements transparent transmission of TTL serial data. The SZ05-L-STD-3 data transmission module acts as a terminal node to transmit and receive data only.

            The SZ05-L-STD-3 devices are part of the CC26XX family of cost-effective ultra-low power 2.4GHz RF devices with very low active RF and MCU currents and low power mode current consumption. Therefore, Shunzhou Intelligent SZ05-L-STD-3 ultra-low power module fully meets the requirements of the Internet of Things for low power consumption, and is very suitable for battery-powered, small-sized smart home, RFID, network sensor, security and access control. And wireless connectivity products such as remote control.

             

            Second, product technical parameters

            Specification model

            SZ05-L

            -XXX

            -XXX

            -X

            Product Series

            Transmission distance

            Data interface

            Antenna specification

            SZ05-L

            -STD-3(100 metres

            -TTL

            -PCB(Built-in antenna)

            For example: Model SZ05-L-STD-3-TTL-PCB, which means SZ05-L series wireless data transmission module, open space transmission distance is 100 meters, TTL interface, built-in PCB antenna.


            Performance characteristics

            Powerful

            Full-featured module with central, relay routing, and terminal capabilities

            Send mode

            Broadcast transmission, fixed target or protocol type transmission mode optional

            Communication distance

            Maximum line of sight transmission distance of 100 meters

            Node type

            Central node, routing node, and terminal node can be set arbitrarily

            Strong anti-interference ability

            2.4G DSSS Spread Spectrum Technology

            Networking capability

            Star network, peer-to-peer network, mesh network

            Serial port application

            Transparent mode or command format transmission, the highest baud rate is 115200

            Network capacity

            16 channels are optional, 65535 network IDs can be set arbitrarily

            The main function

            Serial to wireless, wireless data transmission


            Technical Parameters

            Radio frequency

            2400-2485M 2.4G ISM free frequency band

            Location information

            RSSI

            Wireless rate

            Fixed 250K

            Input voltage

            DC 3.3V

            Serial port rate

            Baud rate 1200-115200 can be set

            Sleep current

            3uA

            Modulation

            DSSS direct sequence spread spectrum

            Transmit power

            3dbm

            Channel mode

            16 channels (interval 5M)

            Receiving sensitivity

            -95dbm

            Channel detection

            CSMA/CA

            Interface Type

            TTL、IO

            Network structure

            Star, peer, mesh (MESH)

            Equipment antenna

            2.4G built-in PCB antenna

            Network ID

            65535 can be specified

            Send mode

            Transparent transfer or instruction format

            Node type

            Central node, routing node, and terminal node can be set

            Operating temperature

            -40℃~+85℃

            IO application

            12 IO ports can be expanded to support switch acquisition, high and low point flat output, analog acquisition, PWM, DS18B20 temperature acquisition, dht21 temperature and humidity acquisition, etc.

            Special Instructions

            This product is too small in size and has no connector pins. It is recommended that customers purchase a special SZ05-L connector backplane.


            Home application parameters



            Technical Parameters

            Input voltage

            DC 3.3V

            Node type

            End device

            Receiving sensitivity

            -97dbm

            Baud rate

            1200-115200 (currently only supports 38400)

            Transmit power

            3.5dbm

            Data interface

            TTL

            stand-by current

            2mA

            Antenna interface

            Built-in antenna, IPEX antenna

            Peak current

            12.5mA

            Sleep mode

            IO sleep (automatic hibernation version)

            Sleep current

            0.1uA

            Transmission distance

            100 meters (visible distance, IPEX antenna)

            working environment

            -40°C ~ 85°C

            Dimensions

            17.0mm * 22.0mm, stamp hole patch